A true edge computer with multiple intelligent algorithms that can control a variety of measurement robots (automatic total stations) and monitoring GNSS and sensors.
DT-IMC-1000 is a monitoring edge computer in the true sense, using X86 architecture, with abundant resources, powerful functions, high long-term stability, compact structure and other advantages, the controller built-in GNSS monitoring static solution, measurement robot automatic control and solution, sensor automatic control and solution edge computing software modules. Its computing power is incomparable to embedded architecture products such as ordinary single chip computers. Since it was put into use in 2015, it has become a mainstream product for structural monitoring of tunnels, DAMS, slopes, railways, Bridges, foundation pits and other scenes.
· Support remote configuration, remote control, remote update;
· Can control Leica, Trimble, Topcon, Soga, Su Yiguang and other mainstream measurement robots;
· Can be used for edge solution of GNSS displacement monitoring scenarios;
· Built-in watchdog, automatic restart, remote power off and restart measuring robot, GNSS receiver and other endpoint equipment;
· Powerful computing power, mass storage, performance far superior to similar embedded architecture products;
· Rich interface, strong scalability, support single station measurement or multi-station joint measurement mode;
· Can connect to mainstream geotechnical digital sensors in the industry;
· Compact and strong, good heat dissipation, high protection level, strong environmental adaptability.
processor | Intel Atom quad-core, main frequency 1.91GHz |
Internal memory | 2G(4G) DDR3*1066MHz |
Hard disk | 64G(higher capacity optional) |
port | RS232/RS485/RS422×1, RS232×2, USB2.0×1, 100M LAN×1 |
Wireless network | GPRS/WCDMA/LTE (2/3/4G network module), 802.11.b/g/n (WIFI) |
Measuring robot | Support Leica, Trimble, Topcon, Soga, Su Yiguang, etc |
Monitoring GNSS | Support Trimble, Novatai, and core star, Sinan, u-blox and other board cards |
sensor | Digital sensors or SCC access |
Power supply | 12VDC 220VAC (standard AC adapter) |
Power dissipation | <10W |
Size (H×W×D) | 165×120×60 (mm) |
Class of protection | IP66 |
Temperature range | Operating temperature: -20℃~+65℃ Storage temperature: -40℃~+85℃ |
Humidity range | Operating humidity: 5%~95%(non-condensing) Storage humidity:<90%(non-condensing) |
Call
South China and Central China Service Hotline：
13928860524
East China and North China service hotline：
17727764409
After-sales service：
18102594604
